Eric
MARKIEWICZ

Zielinski B., Sadat T., Lukic B., Rack A., Markiewicz é., Dubar L. (2023). The morphology and evolution in Al-Cu and Al-Fe magnetic pulse weld interfaces characterized through phase-contrast micro-tomography. Tomography of Materials and Structures, 3, pp. 100018 [DOI=https://doi.org/10.1016/j.tmater.2023.100018].

Zielinski B., Sadat T., Guibert R., Jouaffre D., Markiewicz é., Dubar L. (2023). Interface Morphology Description and Quantification of Al–Cu Magnetic Pulse Welding Joints Using X-Ray Micro-computed Tomography. Journal of Nondestructive Evaluation, 42, pp. 72

Zielinski B., Sadat T., Lukic B., Haugou G., Morvan H., Rack A., Markiewicz é., Dubar L. (2023). Characterization of local mechanical properties of Al/Cu Magnetic Pulse Welded Joints under high strain rates using synchrotron X-Ray Imaging. Materials Letters, 337, ISSN 0167-577X. [IF=3.574] [DOI=https://doi.org/10.1016/j.matlet.2023.133943].

Carassus H., Guérin J.-D., Morvan H., Haugou G., Sadat T., Guerard S., Markiewicz é. (2022). An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of selective laser melting 316L Stainless steel. Materials Science and Engineering : A, 835 [DOI=https://doi.org/10.1016/j.msea.2022.142683].

Thoby J.-D., Fourest T., Langrand B., Notta-Cuvier D., Markiewicz é. (2022). Robustness of specimen design criteria for identification of anisotropic mechanical behaviour from heterogeneous mechanical fields. Computational Materials Science, 207, pp. 111260 [DOI=https://doi.org/10.1016/j.commatsci.2022/111260].

Arif W., Naceur H., Miran S., Leconte N., Markiewicz é. (2021). Fast and accurate multi-material model for the prediction of laser welded structural response. Engineering Computations, 38 (6), pp. 2502-2527 [DOI=https://doi.org/10.1108/EC-04-2020-0205].

Sadat T., Hayashi K., Haugou G., Morvan H., Markiewicz é., Dubar L., Bigerelle M., Ameyama K., Dirras G. (2021). Mechanical properties of spark plasma sintering-processed pure Ti and Ti-6Al-4V Alloys: a comparative study between harmonic and non-harmonic microstructures. Compouds 2021, 1, pp. (41-57) [DOI=https://doi.org/10.3390/compounds1010005].

Leconte N., Bourel B., Lauro F., Badulescu C., Markiewicz é. (2020). Strength and failure of an aluminum/PA66 self-piercing riveted assembly at low and moderate loading rates: experiments and modeling. International Journal of Impact Engineering, 142, pp. 103587. [IF=3.173] [DOI=10.1016/j.ijimpeng.2020.103587].

Bouda P., Langrand B., Notta-Cuvier D., Markiewicz é., Pierron F. (2019). A computational approach to design new tests for viscoplasticity characterization at high strain-rates. Computational Mechanics, 64, pp. 1639-1654 [DOI=10.1007/s00466-019-01742-y].

Tounsi R., Haugou G., Chaari F., Leconte N., Markiewicz é. (2019). Experimental characterization of the mechanical behaviour and the failure of multi-sheet and multi-material spot welded assembly. International Journal of Impact Engineering, 130, pp. 226-238

Fourest T., Bouda P., Fletcher C., Notta-Cuvier D., Markiewicz é., Pierron F., Langrand B. (2019). Image-based inertial impact test for characterisation of strain rate dependency of Ti6Al4V titanium alloy. Experimental Mechanics [DOI=10.1007/s11340-019-00559-3].

Roothaer X., Delille R., Morvan H., Bennani B., Markiewicz é., Fontaine C. (2018). A three-dimensional geometric quantification of human cortical canals using an innovative method with micro-computed tomographic data. Micron, 114, pp. 62-71 [DOI=10.1016/j.micron.2018.07.006].

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2017). Macro-modeling of the strength and failure of multi-layer multi-steel grade spot welds: Connector formulation, assembly model and identification procedure. Thin-Walled Structures, 113, pp. 228–239 [DOI=http://dx.doi.org/10.1016/j.tws.2017.01.023].

Markiewicz é., Langrand B., Notta-Cuvier D. (2017). A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution. International Journal of Impact Engineering. [IF=2.646] [DOI=10.1016/j.ijimpeng.2017.01.028].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2017). Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint. Mechanics & Industry, 18 (3) [DOI=10.1051/meca/2016045].

Chtourou R., Leconte N., Zouari B., Chaari F., Markiewicz é., Langrand B. (2017). Macro-modeling of spot weld strength and failure: formulation and identification procedure based on pure and mixed modes of loading. Engineering Computations, 34 (3), pp. 941-959 [DOI=http://dx.doi.org/10.1108/EC-03-2016-0081]].

Tounsi R., Markiewicz é., Zouari B., Chaari F., Haugou G. (2017). Numerical investigation, experimental validation and macroscopic yield criterion of Al5056 honeycombs under mixed shear-compression loading. International Journal of Impact Engineering 2017. [IF=2.646] [DOI=https://doi.org/10.1016/j.ijimpeng.2017.05.001].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2017). Influence of the heat affected zone on the dynamic behavior of an armored steel fillet welded joint. Int. J. Impact Engineering, 104, pp. 154-163 [DOI=doi.org/10.1016/j.ijimpeng.2016.12.022].

Markiewicz é., Langrand B. (2017). Characterisation and parameters identification of materials constitutive and damage models: from normalised direct approach to most advanced inverse problem resolution. Procedia Engineering, 173, pp. 33-40

Markiewicz é., Langrand B., Leconte N., Fabis J., Dupuy T. (2016). A methodology for the viscoplastic behaviour characterisation of spot-weld heat affected materials. Journal of Materials Processing Technology, 238, pp. 169–180

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Combined effects of the in-plane orientation angle and the loading angle on the dynamic enhancement of honeycombs under mixed shear-compression loading. The European Physical Journal Special Topics (EPJST), 225 (2), pp. 243–252 [DOI=10.1140/epjst/e2016-02632-9].

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Dynamic behaviour of honeycombs under mixed shear-compression loading: experiments and analysis of combined effects of loading angle and cells in-plane orientation. Int J. Solids and Structures, 80, pp. 501-511 [DOI=dx.doi.org/10.1016/j.ijsolstr.2015.10.010].

Notta-Cuvier D., Langrand B., Lauro F., Markiewicz é. (2015). An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method. International Journal of Solids and Structures, 69-70, pp. 415-427, ISSN 0020-7683. [IF=2.035] [DOI=10.1016/j.ijsolstr.2015.05.009].

Hennuyer C., Leconte N., Langrand B., Markiewicz é. (2014). Interpolation functions of a hybrid-Trefftz perforated super-element featuring nodes on the hole boundary. Finite Elements in Analysis and Design, 91, pp. 40-47, ISSN 0168-874X. [IF=1.595]

Maalej Y., Chaari F., Zouari B., Markiewicz é. (2014). Close form solution for the collapse of polygonal thin-walled columns in the axial crushing case. Journal of theoritical and applied mechanics, 52, 3, pp. 707-718. [IF=0.452]

Hennuyer C., Langrand B., Leconte N., Markiewicz é. (2014). Toward the modelling of riveted assemblies by super-elements in fast dynamics. Mechanics & Industry, 15(2), pp. 133-137, ISSN 2257-7777. [IF=0.206]

Tounsi R., Zouari B., Chaari F., Markiewicz é., Haugou G., Dammak F. (2013). Reduced numerical model to investigate the dynamic behaviour of honeycombs under mixed shear-compression loading. Thin-Walled Structures, ISSN 0263-8231. [IF=1.231] [DOI=10.1016/j.tws.2013.08.016].

Mayeur O., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Analysis of the cortical bone thickness of human thorax based on multi-scale imaging techniques. Computer Methods in Biomechanics and Biomedical Engineering, 15(S1), pp. 279-280, ISSN 1025-5842. [IF=1.393]

Notta-Cuvier D., Langrand B., Markiewicz é., Lauro F., Portemont G. (2012). Identification of Johnson-Cook's viscoplastic model parameters using the Virtual Fields Method: application to Titanium alloy Ti6Al4V. Strain, 49, pp. 22-45, ISSN 0039-2103. [IF=0.619]

Jaziri A., Rahmoun J., Naceur H., Drazetic P., Markiewicz é. (2012). Multi-scale modelling of the trabecular bone elastoplastic behaviour under compression loading. European Journal of Computational Mechanics, 21(3-6), pp. 254-269, ISSN 1779-7179

Halgrin J., Chaari F., Markiewicz é. (2012). On the effect of marrow in the mechanical behaviour and crush response of trabecular bone. Journal of the Mechanical Behavior of Biomedical Materials, 5(1), pp. 231-237, ISSN 1751-6161. [IF=2.368]

Dubois D., Silverthorne P., Markiewicz é. (2011). Assessment of seat belt webbing bunching phenomena. International Journal of Impact Engineering, 38(5), pp. 339-357, ISSN 0734-743X. [IF=1.701]

Leconte N., Langrand B., Markiewicz é. (2010). On some features of a plate Hybrid-Trefftz displacement element containing a hole. Finite Elements in Analysis and Design, 46(10), pp. 819-828, ISSN 0168-874X. [IF=1.058]

Langrand B., Markiewicz é. (2010). Strain-rate dependence in spot welds: non-linear behaviour and failure in pure and combined modes I/II. International Journal of Impact Engineering, 37(7), pp. 792-805, ISSN 0734-743X. [IF=1.522]

Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Micromechanical modeling of the anisotropy of elastic biological composites. Multiscale Modeling and Simulation, 8(1), pp. 326-336, ISSN 1540-3459. [IF=2.198]

Dubois D., Zellmer H., Markiewicz é. (2009). Experimental and numerical analysis of seat belt bunching phenomenon. International Journal of Impact Engineering, 36(6), pp. 763–774, ISSN 0734-743X. [IF=1.301]

Leconte N., Langrand B., Markiewicz é. (2009). Hybrid displacement FE formulations including a hole. Structural Engineering and Mechanics, 31(4), pp. 439–451, ISSN 1225-4568. [IF=0.438]

Chaari F., Halgrin J., Markiewicz é., Drazetic P. (2009). Spongy bone deformation mechanisms : experimental and numerical studies. european journal of computational mechanics, 18(1), pp. 67-79, ISSN 1779-7179

Leconte N., Langrand B., Markiewicz é. (2008). Toward a Hybrid-Trefftz element with a hole for elasto-plasticity?. Journal of Computational and Applied Mathematics, 218(1), pp. 88-95, ISSN 0377-0427. [IF=1.048]

Halgrin J., Haugou G., Markiewicz é., Rota L. (2008). Integrated simplified crash modelling approach dedicated to pre-design stage: evaluation on a front car part. International Journal of Vehicle Safety, 3(1), pp. 91-115, ISSN 1479-3105

Chaari F., Markiewicz é., Drazetic P. (2007). Identification of the spongy bone mechanical behaviour under compression loads: numerical simulation versus experimental results. International Journal of Crashworthiness, 12(3), pp. 247-253, ISSN 1358-8265

Delille R., Lesueur D., Potier P., Drazetic P., Markiewicz é. (2007). Experimental study of the bone behaviour of the human skull bone for the development of a physical head model. International Journal of Crashworthiness, 12(2), pp. 101-108, ISSN 1358-8265

Dubois D., Cord H., Markiewicz é. (2007). Innovation test method for seat belt d-ring. International Journal of Vehicle Safety, 2(1/2), pp. 87-102, ISSN 1479-3105

Haugou G., Markiewicz é., Fabis J. (2006). On the use of the non direct tensile loading on a classical split Hopkinson bars apparatus dedicated to sheet metal specimens characterisation ". International Journal of Impact Engineering, 32, pp. 778-798, ISSN 1358-8265

Zouari B., Lauro F., Bennani B., Markiewicz é., Even D., Cornette D. (2006). Efficiency and identification procedures of damage models in dynamic. International Journal of Crashworthiness, 11(6), pp. 583-592, ISSN 1358-8265

Dubois D., Gross P., Trameçon A., Markiewicz é. (2006). F.E. analysis of seat belt bunching phenomena. Int. Journal of Crashworthiness, 11(6), pp. 519-528, ISSN 1358-8265

Spingler G., Drazetic P., Markiewicz é. (2005). Dynamic characterization of polymers to improve numerical simulation for passive safety. Int. Journal of Crashworthiness, 10(1), pp. 87-101

Haugou G., Markiewicz é., Fabis J., Gary G. (2004). Contribution to the definition of a partial overlapping plastic strain rates domain for moderate loadings – Application to tensile testing on metallic materials. Int. Journal of Crashworthiness, 9 (2), pp. 187 - 194

Canaple B., Rungen P., Drazetic P., Markiewicz é., Cesari D. (2003). Towards a finite element head model used as a head injury predictive tool. Int. Journal of Crashworthiness, 8, pp. 19-30

Canaple B., Rungen P., Markiewicz é., Drazetic P., Happian smith J., Chinn B., Cesari D. (2003). Impact model development for the reconstruction of current motorcycle accidents. Int. Journal of Crashworthiness, 7, pp. 307-320

Drazetic P., Langrand B., Markiewicz é., Deletombe é. (2003). Crashworthiness design: an overview. Mécanique & Industries, 13, pp. 1-11

Markiewicz é., Drazetic P. (2003). Experimental and local/global numerical characterization of mechanical strength for spot-welded assemblies. Mécanique & Industries, 3, pp. 1-11

Cebulski L., Boneill C., Drazetic P., Markiewicz é. (2003). Experimental and numerical behaviour of railway rivets under quasi-static promptings. Int. Journal for Computer-Aided Engineeering, 20 (7), pp. 795-809

Patronelli L., Bayart A.-S., Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2003). Structural embrittlement due to the punchings of riveted joints. Mécanique & Industries, 4 (1), pp. 29-39

Langrand B., Patronelli L., Deletombe é., Markiewicz é., Drazetic P. (2002). An alternative numerical approach for full scale characterisation for riveted joint design. Aerospace Science and Technology, 6, pp. 343-354

Langrand B., Patronelli L., Deletombe é., Markiewicz é., Drazetic P. (2002). Full scale experimental characterisation for riveted joint design. Aerospace Science and Technology, 6, pp. 333-342

Baivier S., Drazetic P., Markiewicz é. (2002). FE modelling of human skull in three layers and identification of the behavior low of tables. Archives of Physiology and Biochemistry, 110, pp. 37

Delille C., Masson C., Drazetic P., Delille R., Markiewicz é., Canaple B., Cesari D. (2002). Quasi-static testing of specimens from embalmed human skull : experimental data. Archives of Physiology and Biochemistry, 110, pp. 28

Delille R., Delille C., Drazetic P., Masson C., Markiewicz é., Canaple B., Cesari D. (2002). Quasi-static testing of specimens from embalmed human skull : numerical phase. Archives of Physiology and Biochemistry, 110, pp. 39

Hetier M., Morvan H., Drazetic P., Markiewicz é. (2002). Analysis, modelling and simulation of human behavior during the phase of pre-crash and their consequences during the collision. Archives of Physiology and Biochemistry, 110, pp. 40

Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2001). Riveted Joint Modelling for Numerical Analysis of Airframe Crashworthiness. Finite Element in Analysis and Design, 38, pp. 21-44

Markiewicz é., Ducrocq P., Drazetic P., Haugou G., Fourmentraux T., Berard J.-Y. (2001). Material behaviour law identification for the various zones of the spolt-weld. Int. Journal of Material and Product, 16, pp. 484-509

Canaple B., Rungen P., Markiewicz é., Drazetic P., Cesari D. (2001). Identification of a skull/brain interface representation in a finite element head model. Archives of Physiology and Biochemistry, 109, pp. 107

Delille C., Masson C., Drazetic P., Py P., Markiewicz é., Cesari D. (2001). Quasi-static biomecanics of the human skull: experimental study. Archives of Physiology and Biochemistry, 109, pp. 98

Markiewicz é., Marchand M., Ducrocq P., Drazetic P. (2001). Evaluation of different simplified crash models, application to the under-frame of a railway driver's cab. Int. Journal of Vehicle Design, 26, pp. 187-203

Langrand B., Deletombe R., Markiewicz é., Drazetic P. (2000). Characterisation of dynamic failure for riveted joint assemblies. Shocks and vibration, 7, pp. 121-138

Ravalard Y., Drazetic P., Markiewicz é. (2000). Prototypage virtuel, exemple de crash de véhicules ferroviaires. Mécanique Industrielle, 1, pp. 383-395

Patronelli L., Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2000). Structural embrittlement due to riveted joints evolution to a macroscopic model for crash analysis. Computational Techniques for Materials, Composites and Composite, 1, pp. 103-109

Drazetic P., Payen F., Ducrocq P., Markiewicz é. (1999). Calculation of the deep bending collapse response for complex thin-walled columns, I. Pre-Collapse and collapse phases. Int. Journal of Thin-walled Structures, 33, pp. 155-176

Langrand B., Deletombe é., Markiewicz é., Drazetic P. (1999). Numerical approach for assesment of dynamic strength for riveted joints. Aerospace Science and Technology, 3, pp. 431-446

Markiewicz é., Payen F., Cornette D., Drazetic P. (1999). Calculation of the deep bending collapse response for complex thin-walled columns, II. Post collapse phase. Int.. Journal of Thin-walled Structures, 33, pp. 177-210

Patronelli L., Markiewicz é., Deletombe é., Langrand B., Drazetic P. (1999). behaviour of riveted Joint failure under mixed mode loading. European Journal of Mechanical and Environmental Engineering, 44, pp. 223-228

Ducrocq P., Markiewicz é., Drazetic P., Level P. (1998). A New Method to Quickly Determine the Elastic-Plastic Behaviour of Mild Steels. BENCHmark Magazine, 1, pp. 11-15

Ducrocq P., Markiewicz é., Harmand S., De luca P., Drazetic P. (1998). Thermal Influence on Mild Steel Behaviour During a Crash Event. Int. Journal of Crashworthiness, 3, pp. 163-190

Markiewicz é., Langrand B., Deletombe é., Drazetic P., Patronelli L. (1998). Analysis of the Riveting Process Forming Mechanisms. Int. Journal of Materials and Product Technology, 13, pp. 123-145

Markiewicz é., Ducrocq P., Drazetic P. (1998). An inverse approach to determine the constitutive model parameters from axial crushing of thin walled square tubes. Int. Journal of Impact Engineering, 21, pp. 433-449

Langle F., Drazetic P., Fourmentraux T., Markiewicz é., Ravalard Y. (1997). Similitude of welded structures, an experimental study. Int. Journal of Materials and Product Technology, 12, pp. 124-147

Markiewicz é., Ducrocq P., Drazetic P., Level P. (1996). Application of the kinematic models to the calculation of the Dynamic Crushing Response of Complex Prismatic Sections. Int. Journal of Crashworthiness, 1, pp. 203-224

Drazetic P., Markiewicz é., Level P., Ravalard Y. (1995). Application of the Generalized Mixed Kinematic Model to the Calculation of Crushing Response of Complex Prismatic Sections. Int. Journal of Impact Engineering, 16, pp. 217-235

Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2010). Influence de l'architecture cellulaire de l'os spongieux sur sa réponse mécanique. Mécanique et Industries, 11(3-4), pp. 203-208, ISSN 1296-2139

Delille R., Drazetic P., Markiewicz é. (2005). Paramètres géométriques et mécaniques nécessaires à la reconstruction d'accidents piétons. Mécanique & Industries, 6, pp. 349-352

Delsart D., Ortiz R., Portemont G., Drazetic P., Markiewicz é. (2002). Amerrissage dur et impact sur eau des structures aéronautiques. Aperçus des enjeux et d'un état de l'art au DMSE/RCS. Revue Scientifique et Technique de la Défense, 56, pp. 56-61

Fabis J., Haugou G., Markiewicz é., Drazetic P. (2002). Caractérisation dynamique du comportement des matériaux, des assemblages et des structures. Application au crash et à l'impact. Revue Scientifique et Technique de la Défense, 56, pp. 47-51

Delille C., Baivier S., Delille R., Canaple B., Drazetic P., Markiewicz é., Cesari D. (2002). Identification des lois de comportement du crâne à partir d'essais de flexion. archives of physiology and biochemistry

Delille C., Delille R., Baivier S., Canaple B., Drazetic P., Masson C., Markiewicz é., Cesari D. (2002). Identification d'une loi de comportement de l'os du crâne humain en quasi-statique. CNRiut 2002 Presses Universitaires de Bourgogne, pp. 169-174

Delille C., Drazetic P., Markiewicz é., Canaple B., Masson C., Serre T. (2000). Développement d'une tête physique déformable en stéréolithographie, applications au choc automobile. In Science et Technologies Regards croisés CNRiut ‘2000, Presses Universitaires, pp. 367 - 380

Drazetic P., Markiewicz é., Ducrocq P. (1999). Modélisation et expérimentation en dynamique rapide : Comportement au choc des Structures et Sécurité des Passagers. Science et Technologies : Regards croisés, 10, pp. 563-572

Langrand B., Geoffroy P., Petitniot J.-L., Fabis J., Markiewicz é., Drazetic P. (1999). identification technique of constitutive model parameters for crashworthiness modelling. Aerospace Science and Technology, 3, pp. 215-227

Ducrocq P., Markiewicz é., Fourmentraux T., Drazetic P. (1998). Modélisation des Assemblages Soudés par Points : Application au Crash. Mécanique Industrielle et Matériaux, 51, pp. 73-75

Langrand B., Deletombe é., Markiewicz é., Drazetic P. (1998). Caractérisation Matérielle d'une Liaison Rivetée. Mécanique Industrielle et Matériaux, 51, pp. 76-79

Langrand B., Bos F., Drazetic P., Markiewicz é., Geoffroy P., Petitniot J.-L. (1996). Identification Paramétrique des Lois de Comportement de l'Acier XC48 en Compression: Évolution vers une Méthode Inverse. Mécanique Industrielle, 49, pp. 89-91

Ducrocq P., Arpin F., Markiewicz é., Harmet S., Drazetic P. (1996). Estimation de la vitesse de déformation lors d'un choc par thermographie infrarouge. Mécanique Industrielle, 49, pp. 92-94

Markiewicz é., Lauro F. (2013). Special issue based on contributions at the 3rd International Conference on Impact Loading of Lightweight Structures - International Journal of Impact Engineering, , 53. Elsevier Science, ISBN 0734-743X

Bourel B., Canaple B., Chaari F., Coutellier D., Haugou G., Kaczmarek R., Lauro F., Markiewicz é., Naceur H., Rahmoun J. (2011). 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011). , Valenciennes, France

Langrand B., Notta-Cuvier D., Fourest T., Markiewicz é. (2019). Some advantages of advanced inverse methods to identify viscoplastic and damage material model parameters. Dynamic Damage and Fragmentation, ISTE, Wiley, pp. , ISBN 978-1-78630-408-7

Croix P., Bennani B., Lauro F., Markiewicz é. (2005). Crashworthiness of automotive light materials: magnesium, aluminium and high strength steel. Impact Loading of Lightweight Structures. , M. Alves and N. Jones (Eds), pp. , ISBN 1-84564-159-0.

Zielinski B., Sadat T., Dubois R., La barbera sosa J., Collin C., Lilensten L., Jouaffre D., Markiewicz é., Dubar L. (2023). Interface Characterization by Nanoindentation and EBSD of Cu/Cu and Al/Cu Joints Produced by Magnetic Pulse Welding (MPW). International Conference on the Technology of Plasticity, france, pp. 53-63, septembre .

Morvan H., Haugou G., Carassus H., Guérin J.-D., Guerard S., Markiewicz é. (2023). Evaluation of Dynamic behavior of typical triply periodic minimal surface additively-manufactured structures. SEM 2023 Annual conference of the Society of experimental Mechanics, Orlando, USA, juin .

Markiewicz é., Langrand B., Notta-Cuvier D. (2022). Heterogeneous fields based tests for identification of materials constitutive models at high rate of strains. 3rd International Conference on Impact Loading of Structures and Materials (ICILSM), Trondheim (Norway), juin .

Thoby J.-D., Fourest T., Notta-Cuvier D., Markiewicz é., Langrand B. (2022). Impact of Fullfield measurement biases on Identification of anisotropic material behavior model. 3rd International Conference on Impact Loading of Structures and Materials (ICILSM), Trondheim (Norway), juin .

Leconte N., Bourel B., Lauro F., Markiewicz é. (2022). Characterization and modelling of the fast dynamics strength of a Pa66/Aluminum SPR assembly. rd International Conference on Impact Loading of Structures and Materials (ICILSM 2022), Trondheim, Norway, juin .

Zielinski B., Sadat T., Jouaffre D., Dubois R., Kossman S., Dubar L., Markiewicz é. (2021). A Micro-mechanical and Microstructural Analysis at the Joint Interface Between Dissimilar Materials in Magnetic Pulse Welding (MPW). ICHSF21, Dortmund, Germany, octobre .

Thoby J.-D., Fourest T., Langrand B., Notta-Cuvier D., Markiewicz é. (2021). Impact of DIC biases on the selection process of a unique test for anisotropic plasticity characterization. DYMAT 2021, Madrid (Spain), septembre .

Carassus H., Morvan H., Haugou G., Guérin J.-D., Sadat T., Guerard S., Markiewicz é. (2021). On the effects of build orientation, strain rate sensitivity and sample thickness on the mechanical behavior of 316l Stainless Steel manufactured by Selective Laser Melting. DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Madrid, janvier .

Fourest T., Bouda P., Langrand B., Notta-Cuvier D., Markiewicz é., Fletcher L., Pierron F. (2020). Dynamic VFM to identify viscoplastic parameters. Analysis of impact tests on titanium alloy. Residual stress, thermomechanics & infrared imaging and inverse problems, 6, pp. 101-103, juillet ., ISBN 978-3-030-30098-2

Roothaer X., Delille R., Morvan H., Markiewicz é., Fontaine C. (2019). The assessment of bearing and non-bearing cortical bones: tensile tests and three dimensional study of vascular architecture. 44ème Congrès Société de Biomécanique, 44ème Congrès Société de Biomécanique, octobre .

Roothaer X., Delille R., Morvan H., Markiewicz é., Fontaine C. (2019). A Comparison between Bearing and Non-Bearing Human Bone: Mechanical Testing and Micro-Architecture Assessment. SEM 2019, Reno, USA, juin .

Bouda P., Langrand B., Notta-Cuvier D., Markiewicz é., Pierron F. (2018). Image-based high strain-rate testing for the characterization of viscoplasticity. 12th DYMAT Conference, Arcachon (France), septembre .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2018). Experimental study of the mechanical strength and the failure of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. 12th DYMAT Conference, Arcachon (France), septembre .

Bouda P., Notta-Cuvier D., Langrand B., Markiewicz é., Pierron F. (2018). Optimization of an image-based experimental setup for the dynamic behaviour characterization of materials. Society of Experimental Mechanics (SEM), Greenville SC (USA), juin .

Bouda P., Notta-Cuvier D., Langrand B., Markiewicz é., Pierron F. (2018). Optimization of an image-based impact test for the characterization of viscoplasticity. 2nd International Conference on Impact Loading of Structures and Materials (ICILSM), Xi'an (Chine), mai .

Chtourou R., Leconte N., Chaari F., Zouari B., Markiewicz é., Haugou G. (2018). Macroscopic FE modeling of the tensile strength and the failure of asymmetric multi-layer multi-steel grade spot welded assembly. 2nd ICILSM 2nd International Conference on Impact Loading of Structures and Materials, Xi'an (Chine), mai .

Roothaer X., Delille R., Morvan H., Bennani B., Markiewicz é., Fontaine C. (2018). Quantitative method for the three-dimensional assessment of human cortical long-bone architecture based on µ-CT images. CMBBE 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Lisbon (Portugal), janvier .

Markiewicz é., Langrand B. (2017). Characterisation and parameters identification of materials constitutive and damage models : from normalised direct approach to most advanced inverse problem resolution. 11th International Symposium on Plasticity and Impact Mechanics, Procedia Engineering, 173, New Delhi, India, pp. 33-40, décembre .

Langrand B., Markiewicz é., Notta-Cuvier D., Pierron F. (2017). On some advantages of advanced inverse methods to identify viscoplastic and damage material models parameters. ICACM 2017 Symposium, Annual US-France symposium « Dynamic Damage, Fracture and Fragmentation of Materials », Shalimar (USA), mai .

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2016). Experimental characterisation and macro-modeling of the mechanical behaviour of three-sheet multi-steel grade spot welded assembly. International Conference on Advanced Materials, Mechanics and Manufacturing (A3M2016), Hammamet (Tunisie), décembre .

Chtourou R., Haugou G., Leconte N., Zouari B., Chaari F., Markiewicz é. (2015). Experimental characterization and macro-modeling of mechanical strength of multi-sheets and multi-materials spot welds under pure and mixed modes I and II. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2015). Dynamic behavior and failure of the base and heat affected materials of a HSS fillet welded joint. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Arif W., Naceur H., Leconte N., Markiewicz é. (2015). Numerical modeling of low velocity impact of thin metallic structures using shell finite element enriched by interpolation covers. XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2015), Barcelona, Spain, septembre .

Hennuyer C., Leconte N., Langrand B., Markiewicz é. (2014). A 16-node hybrid-trefftz perforated element featuring 8 nodes on the hole boundary. 11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, juillet .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é. (2013). Dynamic behavior of aluminum honeycombs under mixed compression/shear loadings and effects of cells in-plane orientations. IUTAM Symposium on Recent Development of Experimental Techniques Under Impact Loading, Xi'an, China, mai .

Mayeur O., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Analysis of the cortical bone thickness of human thorax based on multi-scale imaging techniques. 37th congress of the “société de biomécanique”, Toulouse, France, octobre .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Development of New Hopkinson's Device Dedicated to Rib's Bone Characterisation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Strain Rate and Anisotropy Effects on Mechanical Behaviour of Cortical Bone. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Experimental study of aluminium honeycomb behavior under dynamic multiaxial loading: effects of the in-plane orientation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Notta-Cuvier D., Langrand B., Markiewicz é., Bourel B. (2011). Characterization of the dynamic behaviour of a titanium alloy using the Virtual Fields Method. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Rahmoun J., Halgrin J., Naceur H., Markiewicz é., Chaari F., Drazetic P. (2011). Multi-scale modeling of the trabecular bone mechanical behaviour. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Tounsi R., Chaari F., Zouari B., Dammak F., Haugou G., Markiewicz é. (2011). Quasi-static and dynamic behavior of aluminum honeycomb under multiaxial load: numerical experiments. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Mayeur O., Markiewicz é., Drazetic P., Haugou G., Chaari F. (2011). Quasi-static and dynamic behaviour of the bone structures with fine geometric and materials modelling aspects. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2011). Dynamic behaviour of aluminium honeycomb undermultiaxial load: numerical experiments. 3th International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, juin .

Notta-Cuvier D., Langrand B., Markiewicz é., Bourel B. (2011). An advanced procedure to identify viscoplastic parameters using the virtual fields method. International Symposium on Plasticity 2011 and its current application, Puerto Vallarto, Mexico, janvier .

Tounsi R., Zouari B., Chaari F., Dammak F., Markiewicz é. (2010). Numerical modeling of quasi-static crush behavior of aluminum honeycomb under multi-axial loads. International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunisia, décembre .

Rahmoun J., Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2009). Micromechanical modeling of the anisotropy of elastic biological composites - Theory and fundamental concepts. Proceeding of the Fourth International Conference on Multiscale Materials Modeling, Tallahassee, Florida, USA, pp. 327-330, octobre .

Haugou G., Markiewicz é., Halgrin J. (2009). Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars set. 9th International Conference on mechanical and physical behaviour of material under dynamic loading, DYMAT, Bruxelles, Belgique, septembre .

Haugou G., Halgrin J., Markiewicz é. (2008). Proposition of adaptative set-up for compressive loading using a pre-stressed Hopkinson bars device - Application to material responses of cortical bovine bone. International Conference - Impact Loading of Lightweight Structures, Trondheim, Norway, juin .

Langrand B., Markiewicz é., Mahelle P. (2008). Strain rate dependency of spot-welds non-linear behaviour and failure. International Conference - Impact Loading of Lightweight Structures, Trondheim, Norway, juin .

Blanchard S., Langrand B., Fabis J., Markiewicz é. (2008). Identification of plastic behaviour parameters from strongly heterogeneous strain field. SEM XI International congress and exposition on experimental and applied mechanics, Orlando, USA, juin .

Leconte N., Langrand B., Markiewicz é. (2008). Hybrid displacement plate FE formulations including a hole for the computation of full-scale aeronautic structures. ASEM'08, Jeju, South Korea, mai .

Blanchard S., Langrand B., Deletombe é., Markiewicz é. (2007). Characterisation of 6056t78 friction stir welding joint with the virtual field method and strain field measurement. ONERA-DLR Aerospace Symposium (ODAS), Göttingen, Germany, octobre .

Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2007). Spongy bone mechanical behaviour under quasi static to dynamic loadings: development of an equivalent physical model.. Modelling of Heterogeneous Materials, Prague, Czech Republic., juin .

Leconte N., Langrand B., Markiewicz é. (2006). Toward hybrid-Trefftz element for elasto-plasticity ?. FEMTEC 2006, El Paso, Texas, USA, décembre .

Chaari F., Markiewicz é., Drazetic P. (2006). Identification of the spongy bone mechanical behaviour under compression loads: numerical simulation versus experimental results. International Crashworthiness Conference, Athens, Greece, juillet .

Delille R., Lesueur D., Potier P., Drazetic P., Markiewicz é. (2006). Experimental study of the bone behaviour of the human skull bone for the development of a physical head model. International Crashworthiness Conference, Athens, Greece, juillet .

Zouari B., Lauro F., Bennani B., Markiewicz é., Even D., Cornette D. (2006). Efficiency and identification procedures of damage models in dynamic. International Crashworthiness conference, Athens, Greece, juillet .

Haugou G., Markiewicz é., Fabis J. (2006). No-direct tensile loading of sheet specimens on a classical split Hopkinson bars apparatus. 8th International Conference on mechanical and physical behaviour of material under dynamic loading, DYMAT, Dijon, France, janvier .

Lauro F., Drazetic P., Markiewicz é., Deletombe é. (2006). Recent development in crashworthiness : Experimental and numerical fields, Workshop on energy absorbing structures and materials in railway and aerospace and Annual workshop on material testing and modelling. Advanced Passive Safety Network, Athens, Greece, janvier .

Delille R., Delille C., Drazetic P., Masson C., Markiewicz é. (2005). Mechanical characteristics of the human skull bone. Proceedings of the second IASTED International Conference on Biomechanics, Benidorm, Espagne, pp. 240-244, septembre .

Delille R., Lesueur D., Potier P., Rambaud F., Drazetic P., Markiewicz é. (2005). Identification protocol of skull human bone using a mono-layer law. XXXème Congrès de la Biomécanique, Bruxelles, Belgique, septembre .

Baivier S., Drazetic P., Markiewicz é. (2005). Compression tests on spongy bone. Second IASTED International Conference on Biomechanics, Benidorm, Espagne, septembre .

Baivier S., Chaari F., Markiewicz é., Drazetic P. (2005). A micro-finite element reconstruction for identifing spongy bone mechanical behaviour. XXXème Congrès de la Biomécanique, Bruxelles, Belgique, septembre .

Lauro F., Bennani B., Markiewicz é., Langrand B. (2005). Improvement of crashworthiness modelling with history of forming and assembly processes. International Conference on Impact Loading of Lightweight Structures, Florianopolis, Brazil, mai .

Markiewicz é., Langrand B. (2005). Coupling process and structural collapse to access of the material history and improve crashworthiness modelling of assembled structures. Computational Methods for Coupled Problems in Science and Engineering- Coupled Problems, Santorini Island, Greece, mai .

Haugou G., Markiewicz é., Fabis J. (2004). No-direct tensile testing on split Hopkinson bars apparatus : assessment of an original configuration by means of 4-coupon specimens. Crashworthiness of light-weight automotive structures, International Symposium 2004, Trondheim, Norway, juin .

Hault-Dubrulle A., Razafimahery F., Rakatomanana L., Rungen P., Markiewicz é. (2004). Comparison of the CSF models during an impact : Finite Element Analysis. 6th International Symposium on Computer Methods in Bomechanics & Biomedical Engineering, Madrid, Spain, février .

Baivier S., Delille C., Markiewicz é., Masson C., Drazetic P. (2003). Contribution to the contitutive laws of quasi-static human skull bone identification using experimentations and numerical simulations. TILT / ICD 2003, Lille, France, décembre .

Haugou G., Fabis J., Markiewicz é., Gary G. (2003). Partial overlapping domain for material laws behaviour on metallic sheet specimens at a moderate strain rates range. TILT / ICD 2003, Lille, France, décembre .

Bayart A.-S., Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2003). Phenomenological modelling of structural embrittlement in perforated plates. Second M.I.T. Conference on Computational Fluid and Solid Mechanics, Massachusetts Institute of Technology.Cambridge, Ma, USA, janvier .

Delille C., Drazetic P., Masson C., Markiewicz é., Canaple B., Cesari D. (2002). A new head physical model. Proceeding of the International Research Council on the Biomechanics of Impact (IRCOBI), Munich, Germany, septembre .

Baivier S., Drazetic P., Markiewicz é. (2002). FE modelling of human skull in three layers and identification of the behavior low of tables. XXVIIème Congrès de la Biomécanique, Valenciennes, France, septembre .

Delille C., Masson C., Drazetic P., Delille R., Markiewicz é., Canaple B., Cesari D. (2002). Quasi-static testing of specimens from embalmed human skull : experimental data. XXVIIème Congrès de la Biomécanique, Valenciennes, France, septembre .

Hetier M., Morvan H., Drazetic P., Markiewicz é. (2002). Analysis, modelling and simulation of human behavior during the phase of pre-crash and their consequences during the collision. XXVIIème Congrès de la Biomécanique, Valenciennes, France, septembre .

Canaple B., Rungen P., Drazetic P., Markiewicz é., Cesari D. (2002). Towards a finite element head model used as a head injury predictive tool. . Int. Conf. on Crashworthiness ICRASH 2002, Melbourne, Australia, février .

Haugou G., Fabis J., Langrand B., Deletombe é., Markiewicz é. (2002). Iterative experimental/numerical procedure for improvement of dynamic experimental facilities. Structure Under Shock and Impact VII (SUSI2002), Montreal, Canada, janvier .

Delille C., Delille R., Baivier S., Canaple B., Drazetic P., Masson C., Markiewicz é., Cesari D. (2002). Identification d'une loi de comportement de l'os du crâne humain en quasi-statique. CNRiut'2002, Presses Universitaires de Bourgogne, pp. 169-174, janvier .

Delille C., Baivier S., Delille R., Canaple B., Drazetic P., Markiewicz é., Cesari D. (2002). Identification des lois de comportement du crâne à partir d'essais de flexion. XIIIème Colloque Chocs et Bruits, Ecole Centrale de Lyon, France, janvier .

Delille R., Delille C., Drazetic P., Masson C., Markiewicz é., Canaple B., Cesari D. (2002). Quasi-static testing of specimens from embalmed human skull : numerical phase. XXVIIème Congrès de la Biomécanique, Valenciennes, France, janvier .

Canaple B., Rungen P., Markiewicz é., Drazetic P., Cesari D. (2001). Identification of a skull/brain interface representation in a finite element head model. XXVIème Congrès de la Biomécanique, Marseille, France, septembre .

Delille C., Masson C., Drazetic P., Py P., Markiewicz é., Cesari D. (2001). Quasi-static biomecanics of the human skull: experimental study. XXVIème Congrès de la Biomécanique, Marseille, France, septembre .

Langrand B., Patronelli L., Deletombe é., Markiewicz é., Drazetic P. (2001). Iterative experimental/numerical procedure to design riveted joints for airframe crashworthiness. 10th Int. Conf. on Computational Methods and Experimental Measurements, Madrid, Spain, juin .

Patronelli L., Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2001). embrittled element for airframe crash simulations. 7th Int. Conf. on Computer-Aided Design and Optimization, Milano, Italy, mai .

Portemont G., Langrand B., Deletombe é., Flodrops J., Markiewicz é., Drazetic P. (2001). De la validité des Comparaisons calculs/essais dans les problèmes couplés fluide/structure. Congrès Français de Mécanique, Nancy, France, janvier .

Langrand B., Patronelli L., Deletombe é., Markiewicz é., Drazetic P. (2000). FE database of riveted joint models for airframe crashworthiness. Int. Conf. on Crashworthiness ICRASH 2000, London, England, septembre .

Patronelli L., Langrand B., Deletombe R., Markiewicz é., Drazetic P. (2000). Structural embrittlement due to riveted joints evolution to a macroscopic model for crash analysis. Fifth Int. Conf. on Computational Technology, Liège, Belgium, septembre .

Patronelli L., Langrand B., Deletombe é., Markiewicz é., Drazetic P. (2000). experimental procedure for riveted joint conception – from material law until dynamic strength. Int. Conf. on Crashworthiness ICRASH 2000, London, England, septembre .

Canaple B., Rungen P., Markiewicz é., Ravalard Y., Drazetic P., Chinn B. (2000). Simulation Model for Motorcycle/Car Impact in a Lateral Collision Configuration. 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Montréal, Canada, juin .

Patronelli L., Langrand B., Deletombe R., Markiewicz é., Drazetic P. (2000). New experimental procedure for analysis of rivets material mechanical properties. Forum on Crash Questions, Naples, Italy, février .

Delille C., Drazetic P., Markiewicz é., Canaple B., Masson C., Serre T. (2000). Développement d'une tête physique déformable en stéréolithographie, applications au choc automobile. Science et Technologies Regards croisés CNRiut ‘2000, Presses Universitaires, Orleans, pp. 367-380, janvier .

Marchand M., Markiewicz é., Drazetic P., Ducrocq P. (1999). Extended beam element (213) for automatic localisation of collapse mechanisms. 9th User Conference EURO-PAM ‘99, Darmstadt, Germany, octobre .

Patronelli L., Markiewicz é., Deletombe é., Drazetic P. (1999). characterisation of macroscopic criterion for riveted joint failure in airframe crash simulation. 9th User Conference EURO-PAM ‘99, Darmstadt, Germany, octobre .

Canaple B., Rungen P., Drazetic P., Markiewicz é. (1999). Simulation model for motorcycle/car impact in a lateral collision configuration. XXIVème Congrès de la Société de Biomécanique, Beaune, France, septembre .

Patronelli L., Langrand B., Deletombe R., Markiewicz é., Drazetic P. (1999). Analysis of riveted joint failure under mixed mode loading. 25th European Rotorcraft forum, Structures and Materials Session N2, Rome, Italy, septembre .

Marchand M., Markiewicz é., Drazetic P., Ducrocq P. (1999). Localisation automatique des grandes déformations plastiques dans les modèles multi-corps, application sur le châssis d'une cabine de conduite. 14ème Congrès Français de Mécanique, Toulouse, France, septembre .

Patronelli L., Deletombe é., Markiewicz é., Drazetic P., Langrand B. (1999). Caractérisation d'une liaison rivetée sous sollicitations mixtes. 14ème Congrès Français de Mécanique, Toulouse, France, septembre .

Canaple B., Rungen P., Drazetic P., Markiewicz é. (1999). Simulation Model for Motorcycle/Car Impact in a Lateral Collision Configuration. Archives of Physiology and Biochemistry, 107, pp. 100-102, janvier .

Cornette D., Thirion J., Markiewicz é., Drazetic P. (1999). Localization of Collapse Mechanisms for Simplified Vehicle Crash Simulation. Kluwer, Integrated Design and manufacturing in Mechanical Engineering, Luwer Academic Publishers, Allemagne, pp. 19-26, janvier .

Drazetic P., Markiewicz é., Ducrocq P. (1999). Modélisation et expérimentation en dynamique rapide, comportement au choc des structures et sécurité des passagers. Science et Technologies Regards croisés CNRiut ‘99, L'Harmattan, Aix en Provence, pp. 563-572, janvier .

Markiewicz é., Drazetic P. (1998). Caractérisation expérimentale et numérique des assemblages soudés par points sous sollicitations quasi-statiques. Journée Crash ONERA, Châtillon, France, septembre .

Langrand B., Deletombe é., Markiewicz é., Drazetic P. (1998). Caractérisation Matérielle d'une liaison rivetée. Communication présentée au XIIème Colloque 'Vibrations, Chocs et bruits 1998', Lyon, France, juin .

Ducrocq P., Markiewicz é., Fourmentraux T., Drazetic P. (1998). Modélisation des Assemblages Soudés par Points : Application au Crash. Communication présentée au XIIème Colloque 'Vibrations, Chocs et bruits 1998 ', Lyon, France, juin .

Cornette D., Thirion J., Markiewicz é., Drazetic P., Ravalard Y. (1998). Localization of collapse mechanisms in axial compression and bending for simplified vehicle crash simulation. IDMME ‘98, Compiègne, France, mai .

Langrand B., Deletombe é., Markiewicz é., Drazetic P. (1997). Étude expérimentale et numérique de la fragilisation structurale associée au processus de rivetage. Crash-Impact ‘97 Journées Scientifiques et Technologiques, Nantes, France, décembre .

Ducrocq P., Markiewicz é., Drazetic P. (1997). An inverse approach to determine the constitutive model parameters using drop tests and numerical tools. Pam Users Congress ‘97, Prague, Tchequie, octobre .

Langrand B., Markiewicz é., Drazetic P., Geoffroy P., Petitniot J.-L. (1997). Constitutive models characterization for XC48 steel in compression by a parametric identification technique. Int. Journal of Materials and Product Technology, 12, pp. 428-446, janvier .

Belingardi G., Avalle M., Vadori R., Drazetic P., Markiewicz é. (1996). Analysis of the Collapse Modes in the Axial Crushing of Multi-cell Prismatic Tubes. International Body Engineering Conference & Exposition, Italy, octobre .

Cornette D., Markiewicz é., Drazetic P. (1996). Simplified Vehicle Crash Simulation, Part I: Spatial Multibody Modelling with Kane's Method in Natural Coordinates. Proceeding of the Nato Advanced Study Institute on Crashworthiness of Transportation Systems: Structural Impact , & Occupant Protection, Troia, Portugal, juillet .

Markiewicz é., Cornette D., Payen F., Ducrocq P., Anceau J.-H., Drazetic P. (1996). Simplified Vehicle Crash Simulation, Part II: Tools for Multibody Modelling , & Application to an Impacted Double Curvature S Frame. Proceeding of the Nato Advanced Study Institute on Crashworthiness of Transportation Systems: Structural Impact , & Occupant Protection, Troia, Portugal, juillet .

Drazetic P., Markiewicz é., Anceau J.-H., Ravalard Y. (1995). Shock Behavior of Rolling Stock Vehicles: A Multibody Approach. Plasticity'95, Sakai, Japon, juillet .

Drazetic P., Markiewicz é., Anceau J.-H., Ravalard Y. (1995). Crash Resistance of Guided Vehicles: Modeling by Multibody Dynamics. International Crashworthiness , & Design 95, Valenciennes, F, mai .

Leconte N., Bourel B., Lauro F., Markiewicz é. (2023). Caractérisation et modélisation de la tenue dynamique d'un assemblage SPR composite/métallique. Les Assemblages mécaniques - Evolutions récentes et perspectives (5ème Colloque Assemblages), Saint-Ouen, France, juillet .

Leconte N., Chaari F., Haugou G., Markiewicz é. (2023). Construction d'un critère de rupture prenant en compte la qualité des points soudés par résistance. Les Assemblages mécaniques - Evolutions récentes et perspectives (5ème Colloque Assemblages), Saint-Ouen, France, juillet .

Carassus H., Guérin J.-D., Morvan H., Haugou G., Markiewicz é., Guerard S. (2021). Conception et caractérisation d'un absorbeur d'énergie obtenu par fabrication additive. 17ème colloque national S-mart AIP-PRIMECA, France, mars .

Bouda P., Langrand B., Notta-Cuvier D., Markiewicz é., Pierron F. (2017). Conception d'un essai purement inertiel pour la caractérisation du comportement dynamique de matériaux métalliques par la Méthode des Champs Virtuels. Congrès Français de Mécanique (CFM) 2017, Lille (France), août .

Bouda P., Langrand B., Notta-Cuvier D., Pierron F., Markiewicz é. (2017). Méthode innovante de calcul de champs cinématiques dérivés à partir de mesures de champs de déplacement pour la caractérisation du comportement dynamique de matériaux. Congrès Français de Mécanique (CFM) 2017, Lille (France), août .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2017). Experimental characterisation of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. CFM2017, Lille (France), août .

Bouda P., Langrand B., Pierron F., Markiewicz é., Notta-Cuvier D. (2017). Conception d'un essai purement inertiel pour la caractérisation du comportement dynamique de matériaux métalliques par la Méthode des Champs Virtuels. Journées du Groupe de Travail MECADYMAT, Cachan (France), mars .

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2015). Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint. CFM2015, Lyon, France, août .

Chtourou R., Zouari B., Chaari F., Leconte N., Maalej Y., Markiewicz é. (2014). Modélisation du comportement non-linéaire d'un point soudé par un élément équivalent. Congrès Tunisien de Mécanique, COTUME 2014, Sousse, Tunisie, mars .

Hennuyer C., Leconte N., Langrand B., Markiewicz é. (2013). Toward the modelling of riveted assemblies by super-finite elements in fast dynamics. Actes du 21ème Congrès Français de Mécanique, Bordeaux, août .

Hennuyer C., Leconte N., Langrand B., Markiewicz é. (2013). Vers la modélisation des assemblages rivetés par super-éléments finis en dynamique rapide. Actes du 11ème Colloque National en Calcul des Structures, Giens, mai .

Markiewicz é., Tounsi R., Zouari B., Chaari F., Haugou G. (2013). Comportement dynamique des NIDA Al sous chargements mixtes Compression/Cisaillement et effets de l'angle d'orientation des cellules. Journées MECADYMAT 2013, Brest, avril .

Notta-Cuvier D., Langrand B., Markiewicz é., Lauro F. (2011). Méthode des champs virtuels pour la caractérisation de modèles de comportement viscoplastiques. Actes du 10ème colloque national en calcul des structures (CSMA'2011), Giens, mai .

Halgrin J., Rahmoun J., Naceur H., Markiewicz é., Drazetic P. (2011). Modélisation multi-échelle du comportement élasto-plastique de l'os trabéculaire sous sollicitations dynamiques. Actes du 10ème colloque national en calcul des structures, Giens, mai .

Leconte N., Langrand B., Markiewicz é. (2011). Modélisation de l'assemblage riveté par super-éléments en dynamique rapide. Actes du 10ème colloque national en calcul des structures, Giens, mai .

Notta-Cuvier D., Langrand B., Markiewicz é., Lauro F. (2010). Méthode des champs virtuels pour la caractérisation de l'endommagement des matériaux viscoplastiques. Matériaux 2010, Nantes, France, octobre .

Halgrin J., Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Comportement mécanique de l'os trabéculaire : couplage expérimentation-simulation numérique. 19ième Congrès Français de Mécanique, Marseille, août .

Halgrin J., Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Influence de l'architecture cellulaire de l'os spongieux sur sa réponse mécanique. Raous, M., Pasquet, P., Rey, C., Actes du 9ème colloque national en calcul de structures, 1, LMT-Cachan, Giens, France, pp. 407-418, mai ., ISBN 978-2-11-098374-9

Haugou G., Markiewicz é. (2009). Essais de compression dynamique par barres de Hopkinson pré-tendues, Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars. MécaDymat09, Bourges, France, avril .

Chaari F., Halgrin J., Markiewicz é., Drazetic P. (2008). Comportement mécanique de l'os spongieux pour la modélisation virtuelle de l'être humain. Congrès Tunisien de Mécanique, Hammamet, Tunisie, mars .

Leconte N., Langrand B., Markiewicz é. (2007). Développement d'un élément fini de plaque perforée pour le calcul des structures aéronautiques au crash et à l'impact. 18ème Congrès Français de Mécanique (CFM2007), Grenoble, France, pp. 27-31, août .

Chaari F., Markiewicz é., Drazetic P. (2007). Comportement Mécanique de l'os spongieux. Construction de modèles éléments finis par Micro-Tomographie.. 15èmes Journées Nationales sur les Composites, Marseille, juin .

Chaari F., Markiewicz é., Drazetic P. (2006). Analyse Éléments Finis du comportement mécanique de l'os spongieux. Colloque Sécurité dans le Transport, Bordeaux, octobre .

Halgrin J., Haugou G., Rota L., Markiewicz é. (2006). Modèles de crash dédiés phase d'avant-projet : Application sur un bloc-avant automobile. Colloque « Sécurité dans le Transport », Bordeaux, France, janvier .

Mahelle P., Fabis J., Markiewicz é. (2005). Mesure des champs de déformation par stéréo-corrélation d'images sur assemblages soudés soumis à des sollicitations dynamiques rapides. Colloque Contrôles et Mesures Optiques pour l'Industrie, Marseille, octobre .

Delille R., Drazetic P., Markiewicz é. (2005). Paramètres géométriques et mécaniques nécessaires à la reconstruction d'accidents piétons. 17ème Congrès Français de Mécanique, Troyes, France, septembre .

Mahelle P., Markiewicz é., Fabis J., Bennani B., Langrand B. (2005). Caractérisations expérimentales d'assemblages soudés par points soumis à des solicitations dynamiques. 17ème Congrès Français de Mécanique, Troyes, septembre .

Markiewicz é., Baivier S., Chaari F., Drazetic P. (2005). Caractérisation expérimentale et numérique du comportement de l'os spongieux. 1ères Journées de Modélisation numérique en Biomécanique, CSMA, Saint-Etienne, France, avril .

Chabrand P., Drazetic P., Markiewicz é., Masson C., Pithioux M., Serre T., Subit D., Verriest J. (2005). Comportement au choc et rupture de structures squelettiques humaines. Colloque National MECAMAT, Aussois, France, janvier .

Langrand B., Markiewicz é. (2003). Étudier l'histoire de l'assemblage et du matériau pour mieux simuler la ruine de la structure. MécaMat, Aussois, France, janvier .

Cebulski L., Guilloteau L., Drazetic P., Markiewicz é. (2002). Caractérisation expérimentale et numérique d'assemblages rivetés ferroviaires sous sollicitations dynamiques rapides. XIIIème Colloque Chocs et Bruits, Ecole Centrale de Lyon, France, juin .

Drazetic P., Langrand B., Markiewicz é., Deletombe é. (2002). Outils de conception au choc: un panorama. XIIIème Colloque Chocs et Bruits, Ecole Centrale de Lyon, France, juin .

Rungen P., Canaple B., Drazetic P., Markiewicz é. (2002). Mise au point d'un protocole expérimental en vue de mieux comprendre les mécanismes lésionnels développés dans le cerveau lors d'un choc automobile. XIIIème Colloque Chocs et Bruits, Ecole Centrale de Lyon, France, juin .

Hennuyer C., Langrand B., Leconte N., Markiewicz é. (2013). Super-éléments finis pour la modélisation des assemblages rivetés en calcul de structures. Séminaire NAFEMS sur la modélisation et la simulation des assemblages, Paris, mai .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Impact behavior of honeycombs under dynamic multiaxial loading. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Mayeur O., Haugou G., Chaari F., Drazetic P., Markiewicz é. (2012). Improvement of the strain-stress relationships of the cortical bone using refined geometrical data. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Markiewicz é., Langrand B. (2010). Point connectors subjected to quasi-static and dynamic loading conditions: experiments and modelling. Guest lecturer at the International Workshop Modelling and behaviour of light-weight protective structures, Trondheim, Norway, décembre .

Haugou G., Markiewicz é., Halgrin J. (2009). Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars set. International Workshop in Memory of Prof. J.R. Klepaczko – Dynamic Behaviour of Materials, Metz, France, mai .

Drazetic P., Markiewicz é., Ravalard Y. (2004). Nouvelles méthodes de recherche en biomécanique orientés chocs et collisions. Société de Médecine Légale et de Criminologie de France - Séance "Accidentologie et médecine légale", lille, france, septembre .

Delille C., Cutillo A., Drazetic P., Masson C., Markiewicz é., Cesari D. (2001). La stéréolithographie dans l'analyse biomécanique du crâne humain. Communication présentée à Symposium Nord Implant, saint saulve, france, janvier .

Ravalard Y., Markiewicz é., Drazetic P. (2000). Prototypage virtuel : exemple du crash de véhicules ferroviaires. Journée thématique PRIMECA, Valenciennes, France, mars .

Markiewicz é., Cornette D., Payen F., Drazetic P. (1996). Simulation Simplifiée des Véhicules au Crash. Journée d'Information du CETIM SENLIS sur les Chocs : Calcul , & Dimensionnement, Senlis, F, octobre .

Leconte N., Chtourou R., Nguyen T., Markiewicz é., Chaari F., Haugou G. (2016). Modélisation macroscopique d'un assemblage soudé 3 tôles multi-matériaux. Rapport projet ANR ASAP, LAMIH, Valenciennes, janvier .

Leconte N., Maradei G., Markiewicz é. (2013). Simplified Modeling of Welded Joints of Automobile Seats. Rapport de contrat FAURECIA, LAMIH, Valenciennes, janvier .

Tison T., Haugou G., Lallemand B., Markiewicz é. (2007). Calibrabilité des systèmes de déclenchement de retenue passagers en configurations de chocs frontal et latéral. Contrat de recherche Autoliv, LAMIH, Valenciennes, novembre .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2005). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation (ARCELOR). , LAMIH, Valenciennes, juillet .

Markiewicz é., Bennani B., Lauro F., Croix P., Haugou G. (2004). Campagne d'essais sur aciers à très hautes résistances - Etude du comportement à l'endommagement d'éprouvette plates entaillées. Rapport ARCELOR, lamih, valenciennes, janvier .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2004). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation. Rapport ARCELOR, lamih, valenciennes, janvier .

Maillot S., Bennani B., Lauro F., Markiewicz é. (2003). Amélioration de la simulation du comportement en service des structures en acier: Prédiction de la rupture lors d'un crash. Rapport ARCELOR, lamih, valenciennes, janvier .

Maillot S., Lauro F., Markiewicz é. (2002). Modélisation du couplage emboutissage/crash et première approche de la rupture pleine tôle. Rapport ARCELOR, lamih, valenciennes, janvier .

Baivier S., Delsart D., Drazetic P., Markiewicz é. (2001). Etude Biomécanique - Développement des lois de comportement des os du crâne. Rapport technique ONERA, onera, lille, france, janvier .

Dubois D., Markiewicz é., Drazetic P. (2000). Modelling of the bunching phenomena. AUTOLIV-UK, Université, LAMIH, Valenciennes, janvier .

Spingler G., Markiewicz é., Drazetic P. (2000). Expérimentation et simulation numérique de polymères soumis à des sollicitations dynamiques. Rapport de recherche VISTÉON, Université, LAMIH, Valenciennes, janvier .

Demulder D., Markiewicz é. (1999). Simulation numérique de l'essai ARCAN appliqué aux assemblages soudés par points, étude de la rupture. Rapport de recherche RENAULT, Université, LAMIH, Valenciennes, janvier .

Haugou G., Markiewicz é., Drazetic P. (1999). Expérimentation et simulation umérique du rivetage ferroviaire. Rapport de recherche ALSTOM, Université, LAMIH, Valenciennes, janvier .

Marchand M., Markiewicz é., Drazetic P. (1999). Modèles multicorps rigides/flexibles, élaboration et implémentation d'une méthodologie de localisation 3D des rotules plastiques. ESI Group, Université, LAMIH, Valenciennes, janvier .

Spingler G., Markiewicz é., Drazetic P. (1999). Expérimentation et simulation numérique de polymères soumis à des sollicitations dynamiques. Rapport de recherche VISTÉON, Université, LAMIH, Valenciennes, janvier .

Fourmentraux T., Markiewicz é., Drazetic P., Ravalard Y. (1998). Comportement quasi-statique et rupture des assemblages soudés par points. STUDIA, Université, LAMIH, Valenciennes, janvier .

Marchand M., Markiewicz é., Drazetic P. (1998). Modèles multicorps rigides/flexibles, élaboration et implémentation d'une méthodologie de localisation 3D des rotules plastiques. ESI Group, Université, LAMIH, Valenciennes, janvier .

Cornette D., Markiewicz é., Drazetic P., Ravalard Y. (1997). Méthodologie de conception aux chocs des véhicules automobiles en phase d'avant-projet. SOLLAC-LEDEPP, Université, LAMIH, Valenciennes, janvier .